|
#1
|
|||
|
|||
![]()
Hi, just finishing converting my EB4 S3 to brushless and the final piece of the puzzle is the cells, what is the voltage/pack size etc I am Brca legally okay to use?
|
#2
|
|||
|
|||
![]()
At the moment there are no rules from the BRCA for 1/8th scale electric buggies, so most people adopt the US ROAR rules. I think the maximum voltage is 4S and max size of the battery is the same as 2 x 2S batteries. And of course the normal only hard cased batteries to be used. But you can download the full ROAR rule book from www.roarracing.com
|
#3
|
|||
|
|||
![]()
Ya the trend is 4s and roar rules. But a lot of people here in the states hate the 4s rule and ROAR in general. 5s and 6s is very nice and there is not major disadvantage to it.
|
#4
|
|||
|
|||
![]() Quote:
So its all down to your driving style. If your going to 6s id start at 4s first to get the hang of it |
#5
|
||||
|
||||
![]()
Is it best to use 2x7.4 packs as opposed to 1x14.8 pack? What packs are best to use?
|
#6
|
||||
|
||||
![]() Quote:
One 4s pack will give the advantage of tidier wiring but it doesn't really make any difference to the performance, in either case that comes down to the quality/discharge rate of the actual cells and ESC/Motor combo. |
#7
|
||||
|
||||
![]()
I plumped for the LRP ix8 and LRP 2200kv motor, I got 4 x 6000mah 65c 7.4v batterys. Should do the job I hope.
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|