During testing I have found that if you require 4 degree rear toe in on the rear then you get better grip by using the 1 degree rear hubs and the kit 3/2.5 degree hinge pin holders mounted for 3 degrees for the rear toe in settings. This works better than using the 4/1.5 degree hinge pin holders option part which can also give you 4 degrees.
I only use 4 degrees of rear toe in if it is damp or wet.
Schumacher have also made a brass rear hanger 3.5 degree which works well with the standard 3/2.5 degree hinge pin holders mounted for 3 degrees when you need that little bit extra but not the full 4 degrees.
Turning the stock 3/2.5 degree hinge pin holders round the other way to get 2.5 degree rear to in I only use when the track is high grip
I usually use the 4/1.5 degree hinge pin holders in reverse which then gives 1.5 degree toe in for very high grip carpet racing.
HTH
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff!
|