Quote:
Originally Posted by Billy
Okay, I finally raced the speedo last weekend! Eh, second position overall! Not bad at all! As I already felt like by using a stock motor, the speedo has a great feeling, but...
firstly, it sounds like there is rust in it (needs lubricant xaxa) which doesn't really bother me,
secondly if you stop and go sometimes it moves 1 - 2cm backwards and then moves forward #$#??,
thirdly launching from stop has nothing to do with what it felt like with the Nosram speedo I previously had and I do not understand why! It feels like it has no power at all and gradually it becomes powerful, whilst the Nosram was crazy from the very beginning! Throtle program 3 and Nosram 5.5 (sintered). Any idea of what can I do to make it more efficient?
I didn't have time to analyze each problem further, because I was trying to do well in the race, so since the speedo worked okay, I was more concentrated on the cars setup.
I will do some further testing comparing it with a Nosram 2007 but if you have any advice please help!
Oh, and domething else. When the battery is close to below average voltage after 7 minutes approximately I got some serious cogging issues and it had nothing to do with temperature!
|
Billy, the new software solves all of those issues. It revs higher, the delay has gone and it doesn't have that issue towards the end of the pack. It doesn't stutter backwards anymore either (i know Ellis will be happy now
)
I ran the new software this weeknd just gone and the my car was definately not strugling for punch or top end.
It really is worth getting the hotwire, as not only does it allow you to keep your speedo up to date, there are some additional settings to play with aswell.