Quote:
Originally Posted by xfactor
Chassis then,
You can see from the pictures that the chassis is cut down at the rear. This is because the RPM arms are longer than the original RC10 arms. This keeps the width the same.
Also you can see where the holes have been re-drilled by Team Associated to straighten up the battery cup from the A chassis. This is one of the early B stamped chassis as the later just had the 2 holes in the new position.
I have rubbed down the chassis, removed the black anodising, undercoated and went MAN PINK !! I have also filed the top edge back to the alloy to leave a rim around the top edge.........
Its hard to get a true colour, but it is Fluorescent PINK !!
CLICK TO ENLARGE..........
|
Hi, Did you spray yourself? If yes. what paint would you use for a durable finish (or is it pure shelf queen)?