Quote:
Originally Posted by Novamartin16v
Get my B6 & build going well.
Struggling with ally servo horn.
One I had previously was to talk so fouling, been & got another & also to tall.
Which one do I need to buy?
Thanks.
|
I can't understand why so many people have clearance issues with the ae horns, plastic or alloy. If the servo is spaced correctly, I.e. 90 degree drag link, there should be plenty of clearance. Maybe you've fallen for the trap of using too long screws to attach the servo to the mounts causing contact with the side rails. This would be pretty obvious though as the servo wouldn't sit flat. Some low profile servos have a spline location some 4mm closer to the edge, these aren't suitable for the b6.