Quote:
Originally Posted by xfactor
Hi Fruit,
I have measured my RC10 TEAM CVD driveshafts.
Looking at the measurement they are actually shorter.
I would say if the dog bone is too short you will need to play with,
1. Spacers on the shock shaft inside the shock to limit the droop.
2. Play with the spacers/shims in the hub to try and push the bone further into the outdrive.
As stated you could look at, Tamiya do foam bushes for the driveshafts/outdrives just the same as what Dodgy stated with fuel tube.
Hope that helps...... 
CLICK TO ENLARGE...... |
Thanks mate for taking the time to have a look
ok it looks like I'll have to play about with the shafts , you would've thought after all these years of making the RC10 that they would've got the length of the driveshaft right
