Right, just had a look. The reventon R you'll just need to solder the cables to the solder cups.
The motor comes with three 3.5mm connectors on the back, you'll need them on the other end of the cable so you can connect to the motor. Those motors you need to use the connectors.
And as for cutting the battery plug off, do it carefully and FEMALES on the battery, males on the ESC. (And whats G4?)
One fan will run off the ESC, the other you can plug into your Rx. Should have at least one spare port, if not two.
ESC and Servo leads can be shortened, but its fairly easy to tuck them out of the way, so you can use them later in new cars. Make motor and battery cables as short as you realistically can, but with a bit of slack.
Also, it's worth making the battery leads the right length so you can't plug them in back to front.......
But, as per my last post, pictures will help!
|