[danielc3009]

Is this on a b5m and when you say 0.5 degree rear insert do you mean in the hub?

I thought the c mount figure was per side, so 2 degrees mount/insert would give you 2 degrees on each wheel so 4 in total. Someone correct me if I'm wrong.

So if you use 2 degrees inboard toe (c mount) and 0.5 degree outboard (hub insert) then you'll have 2.5 degrees per wheel or 5 total.

Also if you use the aluminium or brass d mount use the inserts with the arrows pointing in unless you use the +4mm c mount and when you use the rear hub inserts use the ones marked with m for mid motor or you be reducing the toe angle. With the c mount inserts the setting is for the top figure as some can be flipped to change the anti squat if that makes sense