[Danosborne6661]

Originally Posted by paulc

I run the motor in kit position with a shorty lipo but use the Schumacher K2 battery straps so you can have the battery back or forward here's Bens from Petit site

http://site.petitrc.com/setup/schuma...n_RHR20150322/

I plan on doing the same Paul rather than the shorty being fixed in place, I'm most inclined to try the shorty in the forward position!

My dad has also been experimenting around with removing plates from the slipper assembly in certain conditions, this could work quite well with this 117t belt set-up if you want more of a 4-gear action in slippy conditions instead of the '3.5-gear' feel.

For those after the 117t, part number is U4494