Sorry I thought the grey bit I've circled was the head of the diff bolt but looking again I guess that's the nut holder. Is the bolt fully tightened in that picture as the gap between the nut holder and bottom of the slot looks too big, there should be almost no gap. I'd check that the spring and nut holder are correct, if your got the standard plastic nut try fitting it and see if the gap is smaller.
Also the b4 diff bolt and nut does fit in the 22 diff, I fitted one in mine when the losi nut kept coming loose
__________________
Team Xtreme Predator X11, Associated b64d, Associated b6.2d, Arc A10, Awesomatix A12, Xray NT1.3
|