The last time that I checked the Evo Team Edition was £290 and is still only gets an outing in the hands of the fast boys when it's hissing down!
Whereas, if you migrate to a low C of G version using your existing front end and either HBI or AZ parts then you will have a car that is becoming faster and faster on high grip surfaces.
The parts needed are as follows:
(UK Prices)
Evo Chassis £15.00
Extra Idler TU0259 and bearings £7.60 plus bearings which are a couple of quid
"Waterfall" brace T02253 £2.99
Battery strap T02258 £3.15
Rear Hanger (TC) £16.00 This includes inserts
Layshaft spacer £3.34
There might be some other bits but I can't remember. ;-)
The Dino parts are the box itself at £60, T-Plate £20, Motor Plate £6.50, C-Lugs £20. =£106.50
£154.58 the lot!
I agree that the shocks need to be upgraded to the aluminium ones but that is true of your current car also.
The AZ box is cheaper than the Dino but does need the aluminium rear brace at about £50. It will also need an aluminium or carbon T-Plate. AZ can provide an aluminium chassis and with any luck so will I soon.
You may also need Chris' Swiss Army Knife and a Dremel!
