Thought I'd do a little update. Tyres arrived as has my shiny new shell & wing
Thing's to do list:
Prep & spray new shell.
The front wheels are slightly narrower where the bearings seat so need to add a small spacer to the axle before mounting wheels otherwise the nut does up before the wheel is tight.
Fit pinion & check diff.
Replace oil in the shocks, rears need a heavier spring.
Still not happy with flex front to rear so will look into manufacturing an alloy top plate.
Set toe & camber all round.
Here are some pics with an existing used shell:
Getting there, should be ready for the end of July
