Quote:
Originally Posted by neallewis
The sanwa info says the 472 wont work with the X. The X is FHSS-3 not FHSS-4. If it binds and works great, but sanwa do not say it will. I've not bound one, so can't say either way.
The 4x2 receivers have telemetry, so data sent in two ways, not just from Tx to Rx. This send back useful data like BEC voltage, and with the sanwa speedo allows settings changes, which is a nice function. Technically in 1/10th OR, telemetry is not allowed, or wasn't last time I read the rules. Never seen it policed though, as lots use the Z.
The 471/481 are FHSS-3/4 with no telemetry. They binds as FHSS-3 on the X and FHSS-4 on the Z. I was talking about the (X vs Z) transmitter protocol, not the receivers, which clearly do both :-)
|
The specs say: Frequency: 2.4GHz FH3/FH4T for the 472, so i assume it does work with the X. Not sure why you would go for the 47 when the 48 is a much better in footprint and no aerial, unless it was substantially cheaper of course
