Well the motor and esc arrived yesterday and it was a smooth intall appart from soldering the wires to the esc ,I needed 2 soldering irons to get the heat needed ! other than that it was easy to set up .
The stock setup is really very usable compared to the one in the TR02V2 RTR package ,the break's are beutiffully progressive and throttle smoth and unfaltering .The 26 tooth pinion on the 13.5T motor is a little slow however and is probably delivering the same speed as the TR02V2 RTR 10T motor with the stock 21 tooth pinion ,so I'm thinking of trying a 28 or 29 tooth and see how it goes .
Thanks for the advise guys .
|