Quote:
Originally Posted by micholix
...
One thing i noticed too was, as i instaled the steering servo, when you steer, or turn the servo horn up to the very front, there is some binding at the steering rack/arm(u4742) and the short socket(u4743), so the tires didnt turn fully to one side!
I cut/grinded a litte bit off of the socket and the problem was solved...
...
|
I noticed, my servo was to much offset, or better, it was to much at the inside, so i will put some of those servo mounting shims behind it, to get it a little bit further out and line up the link.