Assambling the k2 was a incomparable joy
, i'm quit a bit sad, it didnt took longer!
Fit and finish is incredible and everything went together perfect!
Nice too, that the shock protectors are comming with the kit allready!
Two things i noticed at the assambling:
I forgot to set the belt tensioner, the manual did not show when to set, or i missed that step!?
It is a bit of a pain, to set, after the complete building, you cant reach the nut with an nut driver very well because of the battery post at the rear and the chassis brace and side pod at the front...
One thing i noticed too was, as i instaled the steering servo, when you steer, or turn the servo horn up to the very front, there is some binding at the steering rack/arm(u4742) and the short socket(u4743), so the tires didnt turn fully to one side!
I cut/grinded a litte bit off of the socket and the problem was solved...
I do have one more question:
Could someone please tell me, how tight the belts should be adjusted?