I had a similar issue with my team c car once. I was racing indoor on carpet and it was very cold. I had shimmed all the play out of my wishbones and the slightest touch broke them. The cold certainly didn't help either. I removed some of the shims to allow some play and the issue went away. I know it's not a Durango but I do understand your frustration. If I were you I would double check the car and make sure you have at least some play and everything moves freely. Make sure no bolts are overly tight and make sure your shocks are not clamped too tight on the tower. Double check everything and if you still have the issue I would email Durango and send them some wishbones you have broke so they can take a look at the wishbones too see if maybe there is a moulding issue. Hope you resolve this. I personally used to use a v1 version and found the car too be very strong so it's an unusual one but good luck.
|