also occosionally you need to "reverse" the direction of throttle channel to make it work (futaba i think suffers this )
to calibrate HW
hold down little red button on "on/off switch" or button on ESC and switch on
wait till hear a single "beep" for neutral position press button agai to hear "double beep" then hit full throttle on tx (motor is disarmed during this) lastly you should hear a "treble beep" then hit full brake
return trigger or stick to neutral and you should be calibrated
occasonally you may have to switch ESC off and on again
make sure tx end points are at 100% and trims neutral before you start
HTH dave
please PM if still stuck ill talk you through it
|