KF slewing
Hi, Had a similar problem myself. Mine was from a 2nd hand buggy where the diff had been built incorrectly.
1. First thing though, Back brake off if its a high amount, what you running esc setting wise? I run 70% brake on high grip astro which works aok.
2. When you built diff how many shims did you fit between the casings and the primary bezel gears? Was it the same both sides? If one side is tighter than the other it can cause this uneveness. If under hard accelration one side breaks traction it points to the diff. If not its going to be a process of elimination.
Hope this helps. But a 2wd will always break one way or the other by their nature but it makes it fun to 'back' them in!
__________________
Yokomo YZ2's. CaL2 and DTM2.
Kyosho lazer zx
Cat 2000
RC10 Worlds
RC10 B3
Cougar 2's
Topcat
Tamiya DT02 - use as a door stop.
Tamiya TL01 - paper weight.
Tamiya Mini - awesome fun to race
THR - Tudor-Hart Racing - Custom RC products - find us on Facebook.
SHRCCC Committee Member- Track features - design and build.
Returning racer after 25 year break - miss my Optima Mid Custom Special, but not brushed motors & SCE cells.
www.shrccc.co.uk
|