Quote:
Originally Posted by bomber
Neal, I have just put this in my 2wd as my faithful R10 has just died, I'm having trouble getting it to be smooth, it is lighting up the rear wheels up even with not a lot of throttle making the car a absolute handful compared to the Orion, my settings are
Punch rate switch 50%
1st stage punch very weak
2nd stage punch weak
Throttle dead band 80us (Sanwa Radio)
Boost OFF
Turbo 10 degree
all other turbo settings standard
Running a Orion VST2 6.5
|
Sorry Bomber just seen this...
Move your punch rate switch to 1%, which helps move the step point I was feeling away from throttle mid point.
Punch stages are effectively a current limiter. I run both set to medium (or 15) depending on software version.
I found having too much current limit (punch very weak) produced a harder to drive and steppy feel to the throttle combined with the 50% switch point.
Throttle deadband, I reduced this to 50us with my sanwa after experimenting. This means there is less stick movement before the wheels start to turn. Recalibrate after altering this. It's a big help with the feel.
I have a throttle expo curve on a switch on my sanwa so can switch in if I feel I want to smooth out the bottom end for slipper tracks
Turbo on a 6.5 is a bit much for me, but check your delay time at full throttle that it kicks in. Too soon and it can kick in at the wrong point and upset the car.
I don't run boost, seems a bit manic when I've tried it.
Hope that helps you or someone else.