I'll try and post up a setup later, but a couple of things I ran Sunday;
Shocked built with kit shock shafts, but I did replace with O-Rings with AE X-Rings. No issues experienced and no leaks at all. Pistons drilled 1.6F and 1.7R but makes it way too soft. I'd keep with kit pistons (1.5x2) which I'll put back in for this weekend.
Springs are AE. Red fronts and started with Black rear's but changed to Green on rear once grip came up.
Ran 20k front diff oil and 10k rear. Centre was 500k. We'll be testing 1mill this week.
I ran small amount of anti-squat on the rear with high roll centres F&R. Didn't find major issues with it squatting that much, but will continue to try other settings.
Honestly, didn't find any issues with building the shocks, so maybe the AE O-Rings helped straight off. My mistake drilling the pistons out, which I'll rectify this week.
This week I may try slightly lighter diff oils, especially in the front, all depends on weather conditions next week.
Happy to help and share where I can,
Cheers,
Jason
___________________________
Model Cars Reading | MB Models
|