The pro pistons are a big change to the stock ones. The popular configuration is to run the #2 (1.2mm) in the front and the #3 (1.3mm) in the back. Although some of the top guys have started to experiment with a slightly different configuration.
With your under-steer on high speed corners. It may be because you are running too much wing. Look at some of the pictures on Craigs website, or have a look at some of RCimages facebook pictures from MicroX. YOu need to cut a lot of the wing back face down, makes the car much easier on high speed bends.
__________________
Tom
TLR 22-4 2.0, TLR 22 5.0 AC Elite,
Kindly Supported by Trackside Spares, TLR, Spektrum and Horizon Hobby
|