View Single Post
  #6  
Old 01-09-2015
jimbo007's Avatar
jimbo007 jimbo007 is offline
Member
 
Join Date: Jul 2008
Location: south wales
Posts: 44
Default

Quote:
Originally Posted by shinytopman View Post
Hi Jimbo,

I presume you got your answer?

if not:-
The module is air
Receiver is ground

So not compatable, your not the first to do this, in fact i have the same upstairs, only good thing is the receivers are compatable with my spektrum tranny

Can i ask if your futaba module is ok why did you want to change to the orange equipment? was it for the cheap receivers?

Shiny
Shiny,

Yeh got the answer thanks, was looking at changing due to room in the cars I have, and the receivers from orange seem to be smaller than the standard futaba receiver and thought DSM2 would be the way to go and price, as I had some receivers kicking about not being used from the past. It would not of been an issue but since putting the orange module in the back of the 3vc my futaba will not stay bound. It will see and bind the first time and even if the Tx is switched off and on again it will stay bound , but as soon as the Rx is powered off and on again it looses the bind and after looking on the net the light sequence from the Rx relates to an Id lost issue but cannot find a way to re-Id the module. Now I have tried the receivers with a mates handset and no issues at all so a bit stumped. Either I have popped something on the RF board when I put the orange module in or something else at a loss one big headache The 3vc is set to ppm
Kind Regards
James
Reply With Quote