Quote:
Originally Posted by steveproracing
savox servos are relatively easy to replace leads on if you have the right iron and reasonable soldering skills. you need an electronics iron with a needle tip something around 10w-15w anything more will burn the wires and damage the pcb maplin have an antex 15w at sensible money thats perfect for jobs like this
|
savox are one of the worst buddy if its the type where it tucks in under the p.c.b.....you need to un-solder the motor connectors, pot legs and remove the p.c.b then replace the wires from the other side of it, if its the type where the 3 wires are soldered to the back of the board then its straight forward if you are half good with a soldering iron
