View Single Post
  #4  
Old 03-08-2015
SuperRC SuperRC is offline
New Member
 
Join Date: Dec 2013
Posts: 5
Default

Quote:
Originally Posted by Eggey View Post
All I run a TM2 V1, with LRP Flow esc 7,5 turn track & field brushless, and a Voltz 4000 with 30c burst, 21 pinon 85 RW spur, 1000 diff oil, I'm listing all this as I need a bit of help, my car just don't have that much punch on pull away or when you land a jump and you need to full speed down a straight. I've got the LRP boost on max, punch is set at 100% on handset, the clutch spring is just a half turn away from being fully closed, I just don't have great pull away any advice please on what I can do. I run on astro outside, oh and I've got yellow cut lp staggers on front and mini spike blues on the rear. Also the clutch plates and pads are fairly new.

Would it make a difference if I got a shorty with more of a burst, say 80c would this be the issue?
Try using 10K or 20k oil in the diff. I run a TM2v2 with 20K and similar electronics with plenty of punch. If the buggy starts pushing too much through the corners, go down on oil thickness until you have sufficient steering.
__________________
Team C Australia
www.teamcaustralia.com
Reply With Quote