Quote:
Originally Posted by fidspeed
here a daft thought
try If you have another tx or rx you can use ? as you say the the ESC is powered as the fan is working
do you have steering working when you switch on ?
its almost as if the rx is not getting a signal from TX (via esc) hence orange lighton ESC
is the ESC to rx lead plugged into the ESC or is it hard wired from ESc (I have plugged them in wrong way round on ESC before (because red wire is centre pin 5v still goes to esc but the 2signl wire fron rx is wrong way round
no guarantees, it may help though
dave
|
I think this is the issue. The signal is not getting from the esc to the rx. Hence it won't go into setup mode. I have swapped the esc around and all works. So it's definitely the esc to the rx. I have checked it's binded between the rx and the m12 and it is fine. Very frustrating.
Let's go and have another look
Thanks for everyone's advice