[minke]

Originally Posted by Chequered Flag Racing

Try and charge the low one as a single cell through the 2mm balance port and a 4mm port to see if it recovers. Check which cell it is with voltmeter before trying though and and use say 1 amp on 1s setting checking the + & - before starting.

Wouldn't try the Nicad or NIMH method as the second cell is at 4.17v.

You could try to discharge the 'full' cell via the 2mm port & 4mm down to min then try balance charge

not tried this method before and a little confused. How do I find out which cell is low with my meter? Are you saying once ive found out I either plug in the 4mm pos OR the neg ,with the balance 2mm plugged in normally?

I have tried discharge and storage, it will get to 0.3A then alarm goes off.