
THE HILLBILLYMOBILE LIVES!!!
i dont have a youtube account so cant upload video, but have uploaded a few pics
The motor system is a 17.5t speed passion, running off of a 5000mah 2s lipo, the motor is sensorless at the moment as it turns the wrong way when sensored and i can only reverse the motor direction if its sensorless

, so it needs a push or lots of motor juddering to start moving.
when its moving the lorry handles surpringly well, it will lean over and go round coners on three wheels at speed, but as this causes the inside rear wheel to lift off the ground and 'diff out' (diff sending all power to wheel in the air NOT wheel on the ground),it rarely tips over completly.
offroad driving is really good, as the sheer mass of the wooden chassis+cab forces the suspension to really work over a bumpy feild, Meaning that the truck rides over rough terrain very smoothly and dosent get bounced about nearly as much as buggies do, however the 2wd and lots of weight at the front end mean that it can get bogged down and stuck on loose ground
PROGRESS
-the bodywork has been filled and sanded to hide the gaps/sticky out edges , and the edges of the cab have been rounded off to hide the joins and make it less boxy
-the electrics have been remounted inside the cab
-the body and chassis have both started to be painted
-i have updated the build thread on oOple
__________________
THE FLEET
-RC10 gold pan (racecar)
-associated B4 (little brothers car)
-Ansmann master smacker (in bits)
-handmade 1/12 scale lorry (in bits)
-handmade 1/87 RC lorry
-1992 honda transalp (£700 bike, but that's ok as its a big V-twin)