Hi,
If you are using AE springs (which i do sometimes) I'd go with something like:
Hight Grip
Rear = Grey
Front = Orange
Low Grip
Rear = White
Front = Red
On high grip your yellow front might be a bit too soft
Hope this helps
Kev
Quote:
Originally Posted by spiboom85
hi kev information below will the springs be yellow compound front and rear using the team a big bore springs 
Check in my section of the setup area. I have a couple of V1 setups in there
I didn't change a lot from track to track, but the Stotfold one would be good as a general outdoor setup.
I used small bores but with big bore go with something like this
Front
2 x 1.6mm holes
550CST
Spring - TeamC Hard (1 dot)
Rear
3 x 1.4mm holes
300CST
TeamC Hard (1 dot)
Hope this helps
Kev |