This car needs the o rings removing from the side links, when using the side dampers that are not needed, and prevent the side dampers working properly.
Quote:
Originally Posted by northernerbill
Great ideas.
I have swapped the rear most 3mm plastic spacers for RC4WD 3mm alloy spacers
Then swapped out the forward 6mm plastic spacers for RC4WD 5mm alloy spacers, so that boom is 1mm lower or probably 1/2mm lower due to plastic compression.
Then I have fitted thick foam to the lipo brace which is gripping the battery very well.
Whilst tinkering on this lot I noticed the two plastic ball arms that run fwd to back either side of the battery slot caused the rear axle to have play. My kit is essentially brand new having done one meeting, and balls being removed for todays work. So I opted to fit the blue O rings on all the ball joints which has removed this, knowing it affects damping I figured an axle running true is the better option.
 |
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Last edited by mark christopher; 23-06-2015 at 09:08 AM.
|