04-08-2006
|
|
Senior Member
|
|
Join Date: Oct 2005
Location: Bath
Posts: 501
|
|
The B4 rear end mod for the BX, parts you need and a picture!
2 AS3977 3/16 x 3/8 bearings.
1 AS7377 B4 axle bearing spacer.
1 AS9599 B4 MIP CVD complete set or shinny CVD (as shown in the picture)
1 AS9622 Hinge pin (these are a little bit short so not sure if there is a better option)
1 RS28 Rayspeed B4 0.5°.
1 AS9608B Associated Factory Blue Aluminium Wheel Spacer.
As I mentioned above the hinge pins are a little short, so I'm thinking about cutting up some old Losi Shock shafts or something... Also I didn't do a very good job of making the holes bigger on the rear arms, but that’ just me.
http://www.jigsaw7.com/uploads/bigki...XB4rearend.jpg
EDIT: one other thing I’ve forgot to mention is the need for different ball studs than the BX ones, Rayspeed hubs have different threads so I used some Losi titanium ball studs.
Last edited by Bathy; 04-08-2006 at 09:56 AM.
|