I had the same issue ever since buying my MT-4 but it came with 2 Sanwa plastic-geared servos (i.e Futaba S3003 equivalents) and the blue plugs that were attached to those fitted the RX aperture perfectly.
Needless to say I cut them off the £5 servos and soldered them to my servo/ESC wires.
On my other cars I use a servo extension lead for the ESC, this means you can keep unplugging the ESC by hand to try different settings without ruining the plug which would happen pretty quickly if I had to keep unplugging it from the RX with pliers. Still a right PITA unplugging the servo though.
Would be good to know if it's possible to buy genuine Sanwa servo leads, if so that would be the best way to sort it.
Last edited by HOTSHOT III; 11-04-2015 at 09:14 PM.
|