[fletcher]

If your running the 2wd rear end you need 1.6mm of driveshaft spacers between the bearing and driveshaft so that you dont drop a shaft out at full droop. Keep the droop, the car works well with it. Its simple to do, switch the wishbones from left to right and vice versa and then mount the shocks on the front of the tower. Use a longer nut and bolt and add a 2mm spacer behind the shock bush to space the shock away from the link, then also between the ball stud on the block and block itself add a 1mm spacer. That will space the shock and link far enough apart that they wont touch.