Yup best place is here, I am unable to give anything only due to me still racing my car full time now so need all the spares I have which tbh isnt much.
What I would advise is getting an alloy rear top deck holder to deal with the heat dissapation and alloy pivot blocks, pure ten blue chassis steering parts as used by Jamie Booth when the car was released and when he won the Nats with the RR. I would opt for using Robs tensioner as believe it or not was something Bob Gammon was testing at the 93 worlds on his buggy and is designed slightly differently from mine which I can supply as well. This tensions the rear belt and stops it snapping so basically getting a longer lifespan from it. also would be a good idea to add a tensioner to the front belt as well and have designed this as well so can get a drawing of it for you should you decide on buying one from Fibrelyte (link in my name tag).
Teamline front hubs 5 degree and 7.5 degree are what your after, and unsure who here may have a set. if not the other option is for someone to do a 3D drawing of these so it can be printed, yes its weaker than nylon but the design will still be strong and doubt it will break easily.
The other question is if using the car then do you want to go the whole hog and buy from Alcyon his layshaft which was designed for use of the associated B4 or VTS slipper clutch, as this puts the car in the fast lane and competes easily with the new cars.
All CF parts are easily obtainable through Fibrelyte as they copied most items they have on file from me including a tub chassis should you want that ultimate bling factor.
You can also get MIP type UJs from Kyosho as well but other than that think I have mentioned all.
|