[l1am]

Hi All,

I am having a problem with my orca tx motor thats in my MI5evo.

I brought the car second hand and I am running 13.5 blinky with a HW Xerun v2.1 120a. Ive got a FDR of 5.02 (106spur - 38pinion) and timing on the standard 10 degrees on the can and the motor is still coming off track at 65-70 degrees c after a five minute run. I've checked for any binding or drag in the chassis and all seems ok. starting to wonder if the motor is just no good. Is there anything else that could cause these high temperatures? my cheap turnigy motor and hobbywing xerun motor never got anywhere near as hot as this motor with the same FDR so I'm slightly confused.

Any help would be greatly appreciated.

Cheers,

Liam