[rob m]

All the carbon fibre parts have been made by fibre-lyte. The tub chassis is a reproduction of the original tub chassis upgrade but I decided to remove the battery slots and change the cut out for the servo saver into a 1mm deep pocket, I felt it was best to have the chassis without big slots and holes. I also had the cut out for the removal of the motor replicated on the spur gear side to save me from dremmeling a hole to access the motor mounting screw, I think it looks more pleasing to the eye being symmetrical and if the chassis has any flex it will be more even from left to right with the same cut out each side.
The top deck is a copy from the original but with two notches cut in to allow for the bridge wires for the lipo saddle packs.
The rear shock tower is a copy from an original mk2 tower, but the front shock tower is one I designed myself as I wanted the nose of the bodyshell to easily fit through the front without having to cut it off.
The lipo trays are of a simple design as I didn't want to draw any attention to them. The straps are like the original lazer zx items.