Quote:
Originally Posted by sosidge
I always find the small pinions noisy. My Durga seems noisy on the bench but quiet enough on track.
4mm on the slipper is a good setting.
4mm wrench for the turnbuckles.
|
Thanks sosidge, I'm not used to such small pinions but to be honest the whole gearing thing seems weird to me. I had the 7.5t brushless in my RC10 and it needed a 20t pinion so I had nothing in my pitbox lower than a 19t and had to search for the 16t I have now. According to the gear chart I need to go to a 14 or 15 to get the optimal ratio of 12:1 that the motor instructions say it needs!!