Quote:
Originally Posted by spiboom85
Thanks kev
iv just done the diff and it had no oil in' well just like a gunk on the gears but not running out if you get me 
thanks for the piston set up
iv watch the links that have been put on here regarding the shims on the diff
on mine as iv just taken this apart iv only got 1 shim on the gear side of the diff and 1 shim on the other part with the 2 bearings on
will this be ok until I upgrade to the 10k diff oil as ill have remove it all again 
Also as for the springs am I right in 1 notch = hard spring 2 medium 3 soft ?
Thanks |
I think you'll be ok on the shims, i'm pretty sure i just have 1 either side
You are correct on the springs
Cheers
Kev