Quote:
Originally Posted by rob m
On my tm2 v1 im still using my wheels from my b4 on the front and back, the back was easy just took the pin out removed the hex and assembled as you would with the b4 but without the two shims. The front i use the b4 trailing arm, I drilled out the pin hole to 3mm and added a spacer above traling arm .
|
ive done that rob using ae hubs & shafts,car runs perfect but the only problem is the ae hubs pushes the width too 260mm, 10mm to wide for the box,
I just need to try the tc02 shafts and see