Quote:
Originally Posted by neallewis
That spring chart Philim posted above is wrong. Modulus of elasticity constant of the spring steel was guestimated, and is different for each spring set..
TeamYokomo.eu have just released this measured one:
I was working on one similar myself with the Gforce spring rate gauge, but they beat me to it ;-)
I'll try complete the older Yokomo springs to complete the chart. |
If you are going to add the 'older' Yokomo springs, measure the YS and YAS as well, because you don't know HOW (Probably using a GForce thing, but nobody knows.) Bjorn did measure. If you get ~the same results, it should be OK.