Quote:
Originally Posted by julianb
Was the shell used on an i.c. powered car, i.e. has glow fuel attacked the paint? A fine mist of oil residue and general gunk from being run whilst still relatively fresh paint, might cause such an issue - especially if you haven't sprayed some sort of barrier layer after finishing the painting.
cheers
J
|
No, it was on an electric 10th scale. I usually put masking tape inside a shell after I've done it and this may have been how ive not had a problem in the past. I have now got some clear lacquer to finish shells off as the standard thin coats of createx are probably too fragile to have the Velcro stuck straight on
Thanks all for looking and for advice.