I shimmed my posts with 4x6mmx0.3mm shims. Really took out loads of play and seemed to stabilise the buggy's centre point and tighten everything up. I used the Arrowmax brace, but went back to the kit plastic rack with the carbon brace. to be fair the Arroawmax one could also be shimmed as well, but I've fallen out with it now, only because everything was so loose and sloppy. I also replaced the kit bearings with new rubber seal ones which helped tighten it up as well.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2
-------------------------------------------------------------------------------------------------------------------
10electric | Batley Buggy Club | YORCC | RHR | MB Models
---------------------------------------------------------------------------------------------------------------
Last edited by neallewis; 16-01-2015 at 04:00 PM.
|