Ride height doesn't look 40mm. Drop the car and when it settles measure the ride height at front and rear of chassis. If it was 40mm I think your drive shafts would pop out of the outdrives!
If the front shocks are standard you might even need limiters inside to restrict the travel to keep the drive shafts in the outdrives when landing from jumps.
Having said all that, your front shocks and/or springs look non-standard. The springs are at their lightest loading, yet the drive shafts are pointing up toward the centre! Those drive shafts should be horizontal in line most of the time at the correct ride height. Compare the car to someone else's to see where yours has non-standard bits causing the problem. If you have a manual you should see the problem; if not, you can download one from T Associated web site.
|