[knighthawk]

Basically you need to connect the esc to a PC/Laptop to change it to Blinky Mode.

First download the Speed Passion Reventon Software on to your Laptop

On the ESC, First disconnect the fan !
Second Disconnect the cars Lipo Battery

Now.
Connect the program box to the Laptop ! Wait till its connected
Then connect the program box to the ESC ! Wait till its connected and Program box says its connected.

On the Speed Passion program, check/change that its running in Stock 0 ( this is Blinky Mode )

If not change to Stock 0 and press save/upload to esc.

Disconnect when complete, re-wire esc, turn on, you might have to re-calibrate the esc to the radio, but when complete the esc in neutral should have a flashing red light.


Hope this helps