Quote:
Originally Posted by Paultje040
AND the metal triangle that comes with de V2 alu chassis.
 |
If you want to use the v1 plastic chassis, you do not need the triangle piece from the v2 chassis, that centre mounting hole is in corporated in the plastic chassis.
If you have v2 or v3 kits, to run the v1 plastic chassis you need:
B2-002MR - MR/RS Main chassis
B2-002F - Front chassis/front bulkhead (lower plate required only if you have the V3 or Worlds chassis)
M3 x 10mm screws and M3 plain nuts, 3 each to mount the front chassis plate, but no reason not to run M3 x 12mm screws with M3 nylock nuts.
Hope that helps.