Quote:
Originally Posted by Magnus F
Nope.
I have build mine like this:
http://www.petitrc.com/setup/kyosho/...BuildGearDiff/
So far i have tested:
F - R
10k - 5k
10k - 7k
7k - 5k
7k - 7k
I have found 7k front and rear working best for me on indoor carpet.
Going to another indoor track next week for some more testing. |
Yes but in that build of the gear diff he is saying:
"We throw these plastic bushes out and add two 5x8x2.5 bearings. This gives the diff outdrives a lot more support in the diff casing, but you will find also that your diffs last 10 times longer as most of the binding from the plastic bush is now gone. Your diffs also run cooler and smoother. Make sure the o-ring is seated nicely in the casing once the bearing is inserted and is not pinched."
So ill like som 5x8x2.5 bearings and if i understand it correct ill have to buy them as they are not comming with the gear diff? If so can anyone suggest some good bearings? with a link for it?
Is anything else needed right from the go for this kit build?