Quote:
Originally Posted by Macallf
Thank you
The only thing left todo is build shocks and install Electrics!
The kit only comes with one set of pistons, which are 2x1.6mm holes.
|
Sounds like your getting on well!
If you feel like purchasing shock oil, I'd go for 30wt in the rear and 35wt in the front with those pistons, with a green front spring and yellow rear.
Quote:
Originally Posted by simonrhart
The Exotek alloy one is good but note it pushes the servo back a bit so not sure you will get a full size servo in there unless you mount your receiver somewhere else.
|
The V2 Exotek one is more compact design and doesn't require the you to change the servo mounts, therefore the servo stays in the same place.