[mark christopher]

http://www.racing-cars.com/pp/Car_Sh...paStox_GT.html

Features

• 2 Kit Options Available;
  K154 - SupaStox GT Kit - S1/Diff
  K157 - SupaStox GT Kit - C/F

• NEW - Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
• NEW - Pivot Ball Rear End with Front to Back Tube Damper for Improved Bump Riding.
• NEW - Adjustable Rear Ride Height Via Rear Axle Adjusters.
• NEW - Adjustable Front Ride Height on King Pin.
• NEW - Rear Tweak and Roll Stiffness Adjustment via springs and spring position.
• NEW - Adjustable Rear Droop with droop screws.
• NEW - Adjustable Front Droop screws.
• NEW - Shorter, Narrower and stiffer 2.5mm Carbon Fibre or 2.5mm S1 Composite Chassis.
• NEW - Small Kimbrough Servo Saver with Strengthener Included As Standard for improved Steering Geometry.
• NEW - Lightweight Front Foam Bumper and Mounting For Great Protection.
• NEW - Included Ball Bearing Front Wheels.
• NEW - Tweak Free Battery Mounting with Tape. Option Battery Strap Available.
• NEW - CNC Brass Weight Position on Rear Pod for Better Balance.
• NEW - Chassis Weight Balance Pivot Holes. For Use With U3582 Pivot Set.
• NEW - Adjustable Ackerman with Washers.
• NEW - Pivot Front Suspension With Camber, Castor, Droop And Toe-in/out Adjustment.
• NEW - Improved Ground Clearance Rear Body Mounting.
• NEW - Multiple Servo Mounting Positions.
• 70T 48 dp High Efficiency Spur as Standard.
• Chassis accepts 1S or 2S Shorty.
• CNC Alloy Drive Dog Outputs For Precision And Durability.
• CNC High Tensile, Stainless Steel Rear Axle.
• High Tensile, Stainless Steel Suspension Pivots.
• Hign Tensile Steel Hex Screws Used Throughout.
• Adjustable Steering Turnbuckles Included As Standard.
• Ball Raced Rear Axle With Rubber Sealed Bearings.
• High Quality Easy to Follow Instruction Manual.
• Large Range Of Optional 32 and 48dp Spur Gears.
• Fully Adjustable Body Mount System.
• Contact Pre-glued And Trued Foam Tyres Included, 35sh Rear and 47sh Front.
• Full Range Of Optional Colour Coded Springs.
• Accepts A Huge Range Of Industry Standard Bodyshells, Motors, Batteries, And Speed Controllers.
• Torsional Side Damping Adjusted with 'O' Rings or Speed Secret Optional Tube Dampers.