Quote:
Originally Posted by Mattias
I use Tamiya TRF shafts and axles. 70 mm in the front and 64 mm rear. The wheel axles are a bit short, but serrated nuts make it happen.
The reason for using "the other brand" parts is that they were VERY cheap.
I had to put a limiter on the outside of the front shocks to stop the shaft from hitting the outdrive. It was either that or dremeling the outdrives.
|
Kyosho are expensive for ujs but they are a perfect fit and also designed for these size outdrives so if racing I would advise changing what you use. by the way im using the same shell which is available through Kamtec in my links below and your car looks superb.