Thread: Gearing dex210
View Single Post
  #5  
Old 17-09-2014
Adam Skelding's Avatar
Adam Skelding Adam Skelding is offline
Senior Member
 
Join Date: Feb 2006
Location: Chesterfield
Posts: 784
Send a message via AIM to Adam Skelding Send a message via MSN to Adam Skelding Send a message via Yahoo to Adam Skelding Send a message via Skype™ to Adam Skelding
Default

I normally run the SP 7.5 motor on 23 or 24 / 81.
The motor timing on the end bell is around 5 degrees, but 10 is fine on both gearings.

I also have my ESC on DDRS level 2 or 3 with the timing @26.25.

I never run any boost or turbo settings on the ESC, it seems to make the power band way too aggressive and unpredictable for jumping.

Turn off the thermal protection, you shouldn't really be getting near this outdoors, even after 10mins or so of running.

Just give your transmission a quick check over to make sure its free before you go out again... Might be as simple as a seized bearing.
__________________
5 Time Oople Invernational SC Champion.

Powered by OptiPower

Do, or do not, there is no try!
Reply With Quote